MILITEC-1 can be used with petroleum, mineral, parasynthetic and synthetic oils and greases in the following applications and ratios for heavy equipment:
* Bulldozers * Forklifts * Backhoes * Cranes * Road Graders * Trucks * Buses * Vehicles * Track Vehicles * Railroad
Diesel and Gas Engines: Add 2 ounces per liter of engine displacement or two ounces per quart/liter of oil whichever is less for the first 15,000 miles (24,000 KM) or 500 operational hours. Add one ounce per liter of engine displacement or one ounce per quart/liter every 15,000 miles (24,000 KM) or 500 hours thereafter. Add MILITEC- 1 every 1,000 hours of operation if the oil is not changed. Oil change and MILITEC-1 intervals can be extended if the recommended time for oil analyses indicate conditions "normal."
Transmissions (Manual): Add 2 ounces per quart/liter of fluid every 1,000 hours of operation or 30,000 miles (48,000 KM).
Transmissions (Automatic): Add 1 ounce per quart/liter of fluid every 1,000 hours of operation or 30,000 miles (48,000 KM).
Differentials: Add 1 ounce per quart/liter of oil every 1,000 hours of operation or 30,000 miles (48,000 KM).
Power Steering: Add 1 ounce per quart/liter of fluid every 1,000 hours of operation or 30,000 miles (48,000 KM).
Wheel Bearings: Coat metal surface with thin film of MILITEC-1before packing with grease containing 10% to 15% MILITEC-1or use MILITEC-1Grease.
Gearboxes, Fluid Drivers, Speed Reducers: Add 2 ounces per quart/liter of primary lubricant every 1,000 hours of operation or 30,000 miles (48,000 KM). For large sumps with extra large oil reservoirs and oil coolers, add 1 ounce per quart/liter every 1,500 hours of operation.
Air Compressors: Add 3 ounces per quart/liter of primary lubricant for the first 1,000 operational hours. Subsequent applications, add 1 ounce per quart/liter of primary lubricant. Apply each oil change or every 1,000 hours whichever is greater, not to exceed 1,500 operational hours.
Refrigeration, Air Conditioners: Add 1/4 ounce per ton of refrigeration capacity.
Hydraulics: Add 8 ounces to every 5 gallons of hydraulic fluid every 1,000 hours of operation.
Metal Working Applications: Apply a film to all metal working surface zones.
Soluble Oil Fluids: Add 10% to fluid; top off fluid ratios add 5%.
Chains, Couplers: Apply a film to all metal working surface areas.
| Home | Site Use Agreement | Contact Us | Store |
©1988-2009 - MILITEC, INC.